Basic Operations For Performing Settings In The Menu - Sanyo VCC-9700P Instruction Manual

Basic Operations for Performing Settings in
the Menu
To perform settings in the menu, use the joystick lever (1) on the system controller and the [ENTER] button (2) in the CAMERA MENU
CONTROL screen.
• Joystick lever:
Used to move the cursor or select menu options.
Instead of the joystick lever, the control buttons shown in (3) in
the CAMERA MENU CONTROL screen can be used to move the
cursor or select menu options.
• [ENTER] button:
Used to confirm your selection or execute operation commands.
Memo: Some settings in the menu can be performed by using the
sub screen on the system controller. For details, refer to the
system controller instruction manual.
● To select the menu to perform settings
Use the joystick lever (xy) to move the cursor highlighting the menu
item up or down. Move the cursor to your desired menu item using
the lever.
CAMERA
LENS
PAN/TILT
AUTO MODE
ALARM
PRIVACY MASK
PASSWORD
LANGUAGE
OPTION
PRESET
MENU
● To display an advanced setting screen for the
selected menu
The menu item shown with y mark has an advanced setting screen.
After selecting the menu item with y mark, press the [ENTER] button
to display the advanced setting screen.
CAMERA SET y
LENS SET y
PAN/TILT SET y
AUTO MODE SET y
ALARM SET y
PRIVACY MASK y
SET
PASSWORD SET y
● To select an option for the setting item
Use the joystick lever (vw) to display the available options in turn.
SYNC INT
IRIS AUTO y
WHITE BALANCE ATW y
BLC OFF
SHUTTER OFF
APERTURE y
ON
AGC ON y
● To go back to a previous setting screen
Move the cursor to "MENU" and select the "BACK" option, then press
the [ENTER] button.
PRESET
MENU
5
Cursor
SET y
SET y
SET y
SET y
SET y
SET y
SET y
SET y
SET y
OFF
BACK
SYNC INT
IRIS AUTO y
WHITE BALANCE ATW y
BLC OFF
SHUTTER OFF
APERTURE y
ON
AGC ON y
SYNC L-L y
IRIS AUTO y
WHITE BALANCE ATW y
BLC OFF
SHUTTER OFF
APERTURE y
ON
AGC ON y
OFF
BACK
2
3
● To exit from the menu screen
Move the cursor to "MENU" and select the "END" option, then press
the [ENTER] button.
PRESET
MENU
Memo: If there is no menu operation for three minutes or more, the
menu screen is automatically exited.
● To display the menu screen again
Press the [MENU] button in the CAMERA MENU CONTROL screen.
● To restore your selected options to initial values
Move the cursor to "PRESET" and change its option to "ON", then
press the [ENTER] button.
PRESET
MENU
Memo: The following settings cannot be restored.
• Privacy mask
• Preset position
• Camera view
• Camera title
• Password
☞
In this manual, xy represent vertical joystick lever operation
and vw represent horizontal joystick lever operation.
1
<CAMERA MENU
CONTROL screen>
C A M E R A C A M E R A M E N U M E N U C O N T R O L C O N T R O L
esc
MENU
ENTER
E s c E s c t o t o e x e x i t t C A M C A M 2 2 D V R D V R
OFF
END
ON
BACK
1 1