Password Settings (Password); Enabling Password Lock; Disabling Password Lock - Sanyo VCC-9500P Instruction Manual

Password Settings (PASSWORD)

Password can be used to limit the menu setting operations to
specific users.
CAMERA
LENS
PAN/TILT
AUTO MODE
ALARM
PRIVACY MASK
PASSWORD
LANGUAGE
OPTION
PRESET
MENU
b Enabling password lock
When the password lock is enabled, users are prompted to enter
password to display the menu screens. Set the password by
displaying the PASSWORD screen under the respective menus.
Memo: Different passwords can be specified for the main menu and
the advanced menu respectively.
1
Use the joystick lever (xy) to select [PASSWORD] –
"SET y", and press the [ENTER] button.
The PASSWORD screen appears.
PASSWORD
PASSWORD LOCK
PASSWORD CHANGE
MENU
2
Use the joystick lever (xy) to select [PASSWORD
LOCK] – "OFF y", and press the [ENTER] button.
The screen for entering the password appears.
PASSWORD
MENU
3
Use the joystick lever (vw) to select the digit and
use the lever (xy) to select a number.
When setting the password first time, use the factory setting
value (1234).
45
SET y
SET y
SET y
y
SET
SET y
SET y
SET y
SET y
y
SET
OFF
BACK
OFF y
SET y
BACK
1*** SET y
BACK
4
After entering your four-digit password, press
[ENTER].
When the valid password is entered, "OK" appears under the
password entry field and the password lock is enabled.
PASSWORD
MENU
If an invalid password is entered, "NG" appears and the
cursor moves to "BACK".
☞
After completing setting, use the lever to move the cursor to
[MENU] and select "BACK" or "END".
b Disabling password lock
1
Use the joystick lever (xy) to select [PASSWORD] –
"SET y", and press the [ENTER] button.
The PASSWORD screen appears.
2
Use the joystick lever (xy) to select [PASSWORD
LOCK] – "ON y", and press the [ENTER] button.
The screen for entering the password appears.
3
Use the joystick lever to enter the password into the
entry field, and press [ENTER].
"OK" appears under the entry field and the password lock is
disabled.
☞
After completing setting, use the lever to move the cursor to
[MENU] and select "BACK" or "END".
1234 SET y
OK
BACK