E Limiting The Tilting Angle (Tilt Limit) - Sanyo VCC-9500P Instruction Manual

Pan and Tilt Settings (PAN/TILT)

E Limiting the tilting angle (TILT LIMIT)

When the tilting limit angle is not explicitly specified, the limit of
tilting is -5 degrees to horizontal 0 degrees. If necessary, you
can select the tilting limit angle using the following procedure.
By setting the limit angle, the camera cannot be oriented to the
direction beyond the limit angle.
1
Use the joystick lever (xy) to select [TILT LIMIT]
and use the lever (vw) to select the tilting limit
angle.
PAN/TILT SETTING
PRESET POSITION
PROPORTIONAL
FREEZE
SET NORTH
TILT LIMIT
PRESET
MENU
Available settings:
• OFF: Disables the TILT LIMIT function.
• -2, 0, 2, 4, 6, 8, 10, 12, 14, 16, 18, 20, 22:
Sets the selected value as the tilting limit angle.
• MANU: Sets the tilting limit angle manually. (While "MANU"
is selected, pressing the [ENTER] button displays
the setting screen. Monitoring the live image, use
the joystick lever to determine the tilting limit angle,
then press the [ENTER] button.)
There is a parting line around zero degree position on the
dome cover. Depending on the setting of tilting limit
angle, the parting line may come into the camera's view
and could adversely affect the focusing behavior.
☞
After completing setting, use the lever to move the cursor to
[MENU] and select "BACK" or "END".
SET y
ON
OFF
OFF
OFF
OFF
BACK
32