Table of Contents
Advertisement
Separate the front
frame from the
drivetrain.
Take a quarter and slide into the
contacts marked "+" and "-"on
the front intermediate motor
harness connector. (See #1 in
figure 15).
Check the front intermediate motor
10 ohms or less?
harness and the rear intermediate
harness for continuity.
Replace the
controller.
33
Inspect the front and rear
intermediate motor
harness connectors.
No
Yes
Open?
Replace as
necessary.
Are they
discolored or
corroded?
Does each contact
hold the quarter
firmly in place?
LiteRider_SG_REVA_040711
Yes
Replace as
necessary.
No
Replace the front
intermediate
motor harness.
Advertisement
Table of Contents
