Figure B-5: Edit Ts Information Dialog Box - Tektronix RTX130A User Manual

Appendix B: Using the ReMux Application
B-10

Figure B-5: Edit TS Information dialog box

In this dialog box, you can set the following parameters:
File: Specifies the transport stream file to be converted to a transport stream
file of S-TMCC structure.
Data Rate: Specifies the data rate of the transport stream. You cannot set the
value exceeding the data rate of the effective slots. If this value is less than the
data rate of the effective slot, in addition, conversion of the data rate is done
with the insertion of null packets.
Contract Slots: Shows the number of contract slots. This value depends on the
number of slots set in the Modulation item.
Modulation: Specifies the modulation system and the number of slots to be
assigned to HQ and LQ when performing hierarchical data transfer.
HQ: Specifies the modulation system and the number of slots to be
assigned to HQ level.
LQ: Specifies the modulation system and the number of slots to be
assigned to LQ level. This field is enabled only when the hierarchical
control descriptor exists in PMT.
RTX130A QAM & VSB RF Signal Generator User Manual