Quick Start
This section will help you to quickly use the Desire D40XTI Series fixture. For complete,
detailed information and step-by-step instructions, see
I n s t a l l
Step 1:
Step 2:
Step 3:
Step 4:
F o c u s
Step 1:
Step 2:
Step 3:
C o n f i g u r e
S e t D M X A d d r e s s
Using an RDM configuration tool or RDM lighting control device, set the address of the
fixture.
Quick Start
Hang or mount the fixture using the provided hardware and approved hardware
accessories.
Attach an approved safety cable when applicable.
Install a secondary lens, if needed, with the smooth side out.
Attach additional accessories (half shield, louver, etc.), if needed, onto the
fixture.
Using an RDM configuration tool or RDM lighting control device, turn the fixture
on to full intensity.
Adjust the fixture's position as needed.
When focusing is complete, return the fixture to normal operation.
Operation, page
25.
7