Alignment; Cable Connection - CPI GRYPHON User Manual

Alignment

After installation, ensure that there is a small gap of 2-4mm (0.08-0.16 inches) between the
lever on the vending machine and the return lever on the coin changer.
Press the coin return lever on the machine door. Confirm that it fully opens the
•
validator lid on the coin changer, and then smoothly returns and fully closes.
d
Item
a
b
c
d
Check alignment between the coin input chute and the coin cup, ensuring it does not
•
impede operation of the validator lid.
Check alignment between the base of the coin changer, payout area, and cashbox
•
entry.
• Align, adjust, and test as necessary to ensure coins are properly routed before
continuing.

Cable Connection

The coin changer may be fitted with more than 1 cable; these may be intended for transmit
and receive rate (TX-RX) communications, driving an external display, or extracting audit
data. Once relevant cables are connected, and before closing the machine door, tuck any
unused cables away ensuring that none are trapped between the reject lever mechanism
and the vending machine door.
Gryphon
b
a
c
Description
Small gap, 2-4mm (0.08-0.16 inches)
Lever on the vending machine
Return lever on the coin changer
Validator lid
© 2021 Crane Payment Innovations.
All rights reserved.
Coin Changer User Guide
™
EN 9