Specifications
The operating voltage of the coin changer is listed on the label of each product. The label is
located on the left side of the device. It must not be used with any power source other than
that indicated.
Restrictions
Please consult your Crane Payment Innovations (CPI) sales representative; CPI authorized
distributor, or
cranepi.com/support
Safety
The coin changer printed circuit boards (PCBs) are fitted with components that can be
•
damaged by electrostatic discharge. Please observe proper handling procedure for
components exposed to the risk of electrostatic discharge.
Do not use the coin changer if the device or connecting cables are damaged.
•
Turn off power to the vending machine before you remove or clean the coin changer.
•
•
Contact CPI if you wish to alter the construction of the device to a greater extent than
that described in this manual.
If the device is no longer required, please correctly dispose of it.
•
Gryphon
™
for a list of compatible vending machines.
© 2021 Crane Payment Innovations.
All rights reserved.
Coin Changer User Guide
EN 6