Table of Contents
Advertisement
Attach Connections to the Device
After connecting the Power Cable, plug into an available AC power outlet to charge batteries.
Connect the BP cable, SpO
sensor cable, and temperature sensor (if option is included) to the device.
2
Connect the barcode scanner and/or printer to the device if these options are included.
Use the Power Button on the left side of the ADView 2 to turn it on.
NOTE: The blue LED around the Selection Knob will be lit whenever the device is powered on.
Mounting Options
The ADView 2 is designed to be used on a tabletop or mounted to a wall or mobile stand. Your device may be
delivered with the appropriate mounting kit, depending on the configuration your facility ordered. Please see the
separate mounting hardware instructions.
System Configuration
The ADView 2 can be used out of the box with the factory settings.
Changes to the factory settings can be made using the Advanced Configuration Application, which can be accessed
by connecting the unit to a Windows computing device. This method can be used to customize certain default
settings, like choosing either BP or Spo2 as the pulse rate source. Advanced configuration can also be used by
qualified technicians to connect to a network or EMR system.
Please see the separate Advanced Configuration Application guide for more information.
93-9005-00 rev 4
ADView 2 User Manual | 14
September 1, 2016
Advertisement
Table of Contents
