Table of Contents
Advertisement
Side/Temperature Panel Configuration
Filac
Optional modules ordered at the time of original purchase are installed prior to shipping. Modules can also be
ordered later and installed in the field. To install the Covidien Filac™ temperature module, use the included Phillips
head screwdriver to remove the panel cover on the right side of the unit (the right side when the screen is facing the
user). Attach the module and fasten in place. Insert the probe/well assembly into the top of the module.
Side/SpO
Panel Configuration
2
Optional modules ordered at the time of original purchase are installed prior to shipping. Modules can also be
ordered later and installed in the field. To install an SpO2 module, use the included Phillips head screwdriver to
remove the cover on the left side of the unit (the left side when the screen is facing the user). Attach the module and
fasten in place.
93-9005-00 rev 4
ADView 2 User Manual | 12
September 1, 2016
Advertisement
Table of Contents
