Page 1
Made in Japan 55 Commerce Drive tel: 631-273-9600, 1-800-232-2670 Hauppauge, NY 11788 fax: 631-273-9659 ADC (UK) Ltd. w w w. a d c t o d a y. c o m Unit 6, PO14 1TH email: info@adctoday. c o m United Kingdom...
Page 2
Sincerely, result from failure to use the product in accordance with the instructions, cautions, warnings, or American Diagnostic Corp. statement of intended use published in this manual. The 9002 e-sphyg 2 and Adcuff are trade- marks of ADC ®...
Korotkoff sound was taken as the diastolic pressure for the purpose of E x h a u s t : Automatic exhaust valve determining overall efficacy. A copy of this study is available from ADC ® Power Supply: 7.0 VDC AC adapter (MODEL 9605+02225-1UOC) or on request.
C a u t i o n • The standard material used for the bladder, inflation bulb, and coiled tubing is natural rubber latex and it may cause allergic reactions. ADC Item Item no. ADC Item Item no. Latex-free options are available.
The Large Adult size cuff will accommodate that of approximately 13.5 to 20.04 inches (34.3 to 50.9 centimeters). C u ff Sizes (Manual Mode) In manual mode, any of ADC’s ® 5 cuff sizes (infant, child, adult, large adult or 7 5 2 M - 0 2 thigh) may be used, on any patient.
9002W - Wall Unit Parts & Tools Name and function of each part MAIN UNIT ADC Item Item no. SEGMENT LCD COLUMN LCD INFLATION MARK e-sphyg 9 0 0 2 6mm Allen Wre n c h 7 5 2 M - 1 1 6...
Page 8
As a convenience to our customers, a test kit may be obtained BLADDER d i rectly from ADC ® , by calling our Customer Service Depart m e n t TUBE Other parts included depending upon model selected. t o l l - f ree at 1-800-ADC-2670 (p/n 991).
E rror Displays and Tro u b l e s h o o t i n g P reparation for Use Connecting and Using the AC Adapter (All models) ERROR SYMBOL/SYMPTOM C A U S E R E M E D Y Connect AC ADAPTER PLUG to AC ADAPTER JACK A D A P T E R Plug AC ADAPTER in the power socket.
Page 10
E rror Displays and Tro u b l e s h o o t i n g B AT T E RY MARK flashes in the segment LCD when the battery charge is low. Only a few more measurements remain before the battery runs down. ERROR SYMBOL/SYMPTOM C A U S E R E M E D Y...
4 . Attach 8 foot length coiled tubing to air inlet on face of DEFLATION ERROR: Make sure the patient (Figure 5). e-sphyg 2 Movement or talking was remains still and I n s e rt “male” luer connector (891M) on free end of detected during measurement.
How to Assemble Mobile Model M e m o ry Function M e a s u red result obtained in "AUTO" mode is automatically saved 1. With base on its side connect upright outer pole to base in the memory and can be recalled until next measurement is taken. using large (6mm) allen bolt.
Page 13
(Coiled Tubing) e-sphyg 2 . Make sure connector f i rm ly “lock” snaps Deflation rate is displayed at the lower right corner of the segment LCD.
Page 14
Tu rn off the device by pressing "O" side of MAIN POWER SWITCH. ARM CIRCUMFERENCE CUFF SIZE Apply the cuff to patient's arm . Choose the right size of cuff for 10.28 to 16.1 inches (26.1 to 40.9 cm) ADULT The device will go to the energy saver mode after appro x i m a t e l y 13.5 to 20.04 inches LARGE ADULT...
Need help?
Do you have a question about the e-sphyg 2 and is the answer not in the manual?
Questions and answers