Activate/Deactivate Automatic Door; Delayed Start Time - Hanseatic HGTI6082D137709HS User Manual

Dishwasher operation
Activate/deactivate automatic
door opening
9h
6h
3h
Verzögerung Auto Open
(8)
The "Automatic door opening" function is acti-
vated as standard. The appliance door opens
automatically during the drying phase of the
dishwashing programme and remains open.
This ensures particularly efficient drying. Wait
for the programme to end before removing
the dishes to achieve the best possible drying
result.
Automatic door opening can be deactivated.
However, this can impact the drying effect
and can change the energy consumption.
• In order to
– deactivate the "Automatic door open-
ing" function, press the button (8). The
display (11) goes out. The appli-
ance door remains locked when the
programme has reached the drying
phase.
– activate the "Automatic door opening"
function, press the (8) button again.
The display reading
(11)
Start/Pause
(11) lights up.

Delayed start time

The dishwashing process normally starts as
soon as you press the start/pause button (12)
. If you want the cycle to begin later, you
can specify this.
1. Switch the dishwasher on using the
On/Off button (2).
2. Select the desired dishwasher pro-
gramme using the programme selection
button (4).
9h
(7)
6h
3h
Verzögerung Auto Open
(6)
3. Repeatedly press the Delayed start time
button (6), until the display (7) of the de-
sired delayed start time (3, 6 or 9 hours)
lights up.
4. Then start the dishwasher by pressing
the Start/Pause button (12)
The Delayed start time countdown starts
and the wash programme begins auto-
matically at the set time. The display (7)
of the desired Delayed start time will flash.
Page EN-23
Start/Pause
.