Eagle IntelliMap 502C iGPS Installation And Operation Instructions Manual page 58

The Transfer My Data submenu asks if you want to save data to the
MMC or load data from the MMC into the unit's memory.
2. The Transfer My Data menu includes a message which tells you if an
MMC is present or not. If no MMC is present, you must first insert a
card into the unit in order to activate the Load or Save commands.
To transfer data from the unit to the MMC: press
To transfer data from the MMC to the unit: press → to
3. Saving to MMC: To accept the default name "Data" for the GPS
Data File, press ↓ to
shown in the following figures), press
Press ↑ or ↓ to change the first character, then press → to the next
character and repeat until the name is correct. Then, press
|
S D ENT
AVE ATA
The unit will display first a progress then a completion message when
the data transfer is finished. To return to the Page view, repeatedly
press .
EXIT
From left to right, these figures show the menu sequence for naming
and saving a GPS Data File from the unit's memory to an MMC.
S D
AVE
.
| . If you wish to rename the file (as
ENT
ATA
ENT
52
ENT
to activate the selection box.
(for .)
S
AVE
| .
L ENT
OAD
|↓ to
ENT