Eagle IntelliMap 502C iGPS Installation And Operation Instructions Manual page 65

Route Planning command on Main Menu, left,
will open the Route List screen, right.
2. If necessary, press ↑ to select
, then press . (To add to
N R ENT
EW OUTE
an existing route, press ↓ or ↑ to route name|
.)
ENT
3. Press ↓ to
| |↓ to | . The Map Page
(R ) ENT A F M ENT
OUTE END DD ROM AP
appears with the cursor showing.
Edit Route menu, left. Edit Route Waypoints menu, right,
with Add From Map command selected.
4. Use the Zoom keys and arrow keys to move the map and cursor until
the cursor is centered on the spot where you want your route to begin.
(If you are starting at your current position or the current cursor posi-
tion, you are already at the starting spot.)
5. Set the first route waypoint: press . In this example, we moved to
ENT
the entrance of the cove where our boat was docked to start out route a
promising fishing spot next to an oil platform. (Creating this example
route is illustrated in the following figures.)
59