Map Detail Category Selection - Eagle IntelliMap 502C iGPS Installation And Operation Instructions Manual

ated using different datums will show the same latitude/longitude in
slightly different locations.
All datums are named. The GPS system is based on the WGS-84 da-
tum, which covers the entire world. Other datums may also cover the
entire world, or just a small portion of it. By default, your position
shows using the WGS-84 datum. However, it can show your position
using one of 191 different datums. Different datums can be selected; to
change the datum:
1. Press
MENU
2. Scroll ↓ or ↑ to select the desired datum, then press
3. To return to the last page displayed, press
A list of the datums used by this unit is in the back of this manual.
GPS Setup Menu, left, Map Datum Menu, right.

Map Detail Category Selection

This menu determines which of the mapping features are shown on the
screen. This includes, waypoints, trails, icons, cities, highways, etc. You
can selectively turn on or off any of these items, customizing the map to
your needs.
To get to Map Categories:
1. From the Map Page, press
↑ ↓
2. Press or
gory. Press
ENT
3. To return to the last page displayed, press
| |↓ to
MENU GPS S
to select a category or press
to turn it off (no check) or on (checked.)
| |↓ to
ENT
ETUP
|↓ to
MENU M
AP
79
D S
ATUM ELECTION
ENT
| .
EXIT EXIT
C D
ATEGORIES RAWN
or ← to select a subcate-
→
| .
EXIT EXIT
| .
ENT
.
| .
ENT