Eagle IntelliMap 502C iGPS Installation And Operation Instructions Manual page 112

Find Highway Exits command (left) and Find Exit menu at right.
2. First, select a highway name by pressing , which calls up the
ENT
Find By Name menu. There are two highway search options: A. You
can spell out the highway name in the top selection box. Press ↑ or ↓
to change the first letter, then press → to move the cursor to the next
letter and repeat until the name is correct, then press | . B.
ENT ENT
, then press ↓ or ↑
Jump down to the lower selection list by pressing
ENT
to select a highway from the list, then press .
ENT
Find By Name menu.
3. Once you have selected a highway name you can then select an exit.
Press ↓ to switch to the Exit List, then press ↓ or ↑ until you highlight
the exit, then press
ENT.
106