Trail Options; Delete All Trails; Update Trail Option - Eagle IntelliMap 502C iGPS Installation And Operation Instructions Manual

Trail Options

There are several options you can use with trails. Some affect all trails,
other options can be applied to a particular trail. You can change the
way trails are updated, display or hide trails, create a new trail, delete
a trail, etc.
General Trail Options
To access the Trails Menu:
1. Press
MENU
Main Menu, left, Trails Menu, center, Trail Options, right.

Delete All Trails

To remove all of the trails from memory: from the Trails Menu, press →
to |
D A ENT
ELETE LL

Update Trail Option

This menu lets you change the way the trail updates occur.
WARNING:
If you uncheck the Update Trail option, automatic trail
creation and recording will be turned off. You must turn
it back on to record trails. The default setting is on.
From the Trails Menu, press ↓ to
highlighted, press
Update Trail Criteria (Auto, Time, Distance)
The options are automatic, time, or distance. When it's in the default
automatic mode, the unit doesn't update the plot trail while you're
traveling in a straight line. Once you deviate from a straight line, the
unit "drops" a plot point (trail waypoint) onto the trail. This conserves
plot trail points. If a plot trail uses all of the available points allotted to
it, the beginning points are taken away and placed at the end of the trail.
| |↓ to
MENU M
|← to |
Y
ES
to check it (turn on) and uncheck it (turn off).
ENT
| .
T ENT
Y RAILS
.
ENT
|
O
PTIONS
97
. With
ENT U
PDATE
A T
CTIVE RAIL