Trails; Delete A Trail - Eagle IntelliMap 502C iGPS Installation And Operation Instructions Manual

Navigating along a route: Fig. 1 shows the Navigation Page at the start
of a route, heading straight for the first waypoint (Wpt 1). In
Fig. 2, the traveler has arrived at Wpt 1; the arrival alarm has been trig-
gered and the bearing arrow on the compass rose has turned to point
In Fig. 3 the traveler has turned northeast on his new course and is
heading straight for Wpt 2, which is 0.27 miles away. Fig. 4 shows route
navigation on the Map Page. In this figure, the traveler has reached Wpt
2 and is starting on the leg between Wpts 2 and 3.

Trails

Delete a Trail

This is the
Press |
MENU
|
D T ENT
ELETE RAIL
Figure 1.
toward Wpt 2, off to the northeast.
Figure 3.
command
|↓ to
MENU M
|← to |
Y
ES
used to
|
T ENT
Y RAILS
.
ENT
64
Figure 2.
Figure 4.
erase or delete
|↓ to trail name|
a trail:
|↓ to
ENT