Eagle IntelliMap 502C iGPS Installation And Operation Instructions Manual page 95

Selecting the category name and pressing
contents, so you can choose items within it. An expanded category (one
with a "–" next to its name) can be collapsed to hide its contents, and
make more room on your screen. Just select the category name and
press .
ENT
3. Expand any categories that might contain information you want to
display. Then press ↓ or ↑ to select a display option.
4. With the option highlighted, press
check it (turn off). As you turn categories on, data will float in your dis-
play window. Every Page display has a maximum number of items you
can float on your display using the Overlay Data command.
5. After all options are set, press
From Overlay Data Shown (left) press ENT to see Data Viewer (center).
Select a category and press ENT; then select information to float on
To remove overlaid data:
1. While on the Page that shows the item or items you want to remove,
press |↓ to
MENU
2. You'll see a list of the overlay data currently displayed. Select the
item you want to remove from your display and press
move the data. To remove another item, select the item and press
|
.
ENT ENT
3. When you have finished removing all the items you want from the
screen, press
EXIT
screen and press ENT (right).
|
O D
VERLAY ATA
to return to the page display.
ENT
to check it (turn on) and un-
ENT
| to return to the page display.
EXIT EXIT
.
ENT
89
will show the category's
|
ENT
to re-
ENT