Map Orientation - Eagle IntelliMap 502C iGPS Installation And Operation Instructions Manual

Configure a map fix so the unit can find your position on a
Press → to
S
ELECT
Select the waypoint (or a landmark of POI) that you saved the reference
point under and press
screen with the command
returns to the Configure Map Fix menu. Finally, press
this menu. Now press ↑ to
list and press
tance from the reference point you chose.

Map Orientation

By default, this receiver shows the map with north always at the top of
the screen. This is the way most maps and charts are printed on paper.
In Track Up mode, map shows "N" and arrow to indicate north.
Map orientation at left is shown in north up and at right, track up.
printed chart or topographical map.
|
O ENT
RIGIN
. The unit displays a waypoint information
ENT
S
ET
| . All position information now shows as a dis-
ENT EXIT
| | to bring up the waypoint list.
ENT ENT
selected; press
A O
S RIGIN
|
C S
OORD YSTEM
81
ENT
, select
ENT M
AP
and the unit
to erase
EXIT
from the
F
IX