Configure Nmea - Eagle IntelliMap 502C iGPS Installation And Operation Instructions Manual

For connectors and wiring information for another device, see page 14.
For assistance in configuring the unit to communicate with another
device, consult the factory; customer service phone numbers are in the
back of this manual. Also see the entry below for Configure NMEA. To
set Com Port Configuration:
1. Press
MENU
2. Press ↓ to
C

Configure NMEA

You can configure the unit to use specific NMEA sentences.
1. Press
MENU
2. Press ↓ to
C
3. A menu appears showing the prefixes of the available NMEA sen-
tences. A check mark next to a prefix means the prefix is in use. Use ↑
↓ → ← to select a prefix, then press
again to check the box and turn a prefix on.)
ENT
NOTE:
The names of the NMEA sentences are abbreviated in this menu.
These are the functions of the various selectable prefixes:
•
GLL transmits latitude and longitude of present position, time
of position fix, and status.
•
RMC and RMB transmits navigation information messages.
•
APB transmits autopilot information.
•
GGA transmits time, position, and fix related data.
Menus for changing Com Port settings.
| |↓ to
MENU S
P
OMMUNICATIONS
| |↓ to
MENU S
P
OMMUNICATIONS
|
S ENT
YSTEM ETUP
| .
ENT
ORT
|
S ENT
YSTEM ETUP
| |↓ to
ENT
ORT
ENT
71
.
.
C NMEA
ONFIGURE
to turn off the prefix. (Press
| .
ENT