Eagle IntelliMap 502C iGPS Installation And Operation Instructions Manual
  1. Manuals
  2. Brands
  3. Eagle Manuals
  4. GPS
  5. IntelliMap 502C iGPS
  6. Installation and operation instructions manual

Eagle IntelliMap 502C iGPS Installation And Operation Instructions Manual

Eagle gps receiver installation and operation instructions
Hide thumbs Also See for IntelliMap 502C iGPS:
Table of Contents

Advertisement

Quick Links

Pub. 988-0152-141
www.eaglesonar.com
Mapping GPS Receiver
Installation and Operation
Instructions

Advertisement

Table of Contents
loading

Related Manuals for Eagle IntelliMap 502C iGPS

Summary of Contents for Eagle IntelliMap 502C iGPS

  • Page 1 Pub. 988-0152-141 www.eaglesonar.com Mapping GPS Receiver Installation and Operation Instructions...
  • Page 2 No part of this manual may be copied, reproduced, republished, transmitted or distributed for any purpose, without prior written consent of Eagle Electronics. Any unauthorized commercial distribution of this manual is strictly prohibited.  Eagle IntelliMap MapCreate, FreedomMapsand NauticPath are trademarks of LEI.

  • Page 3: Table Of Contents

    Displaying a Saved Trail ... 47 Navigating Trails... 47 Visual Trailing ... 48 Navigate a Trail (forward)... 48 Navigate a Back Trail (backtrack, or reverse)... 50 Transfer Custom Maps and GPS Data Files ... 51 Table of Contents ® 502C iGPS... 2...
  • Page 4 Custom Maps:... 51 GPS Data files: ... 51 Cancel Navigation ... 53 Section 4: Advanced GPS Operations... 55 Find Distance From Current Position To Another Location ... 55 Find Distance From Point to Point... 55 Icons ... 56 Create Icon on Map ... 56 Create Icon at Current Position ...
  • Page 5 GPS Simulator ... 75 To get to the GPS Simulator:... 75 Simulating Trail or Route Navigation ... 76 Initialize GPS... 76 Map Auto Zoom... 77 Map Data ... 77 Show Map Data ... 77 Pop-up Map Information ... 78 Map Boundaries ... 78 Fill Water With White ...
  • Page 6 Section 6: Searching ... 101 Find Addresses ... 102 Find Any Item Selected by Map Cursor ... 105 Find Interstate Highway Exits ... 105 Find Map Places or Points of Interest (POI) ... 108 Find Streets or Intersections ... 110 Find a Street ...

  • Page 7: Section 1: Read Me First

    First, we want to thank you for buying an Eagle GPS unit. Whether you're a first time user or a professional fisherman, you'll discover that your IntelliMap 502C iGPS is easy to use, yet capable of handling de- manding navigation tasks. When you team your unit with our custom mapping software MapCreate...

  • Page 8: Capabilities And Specifications: Intellimap ® 502C Igps

    GPS options in Section 5, System Setup and GPS Setup Options. Section 5 is organized in alphabetical order. In Section 6, we go into more detail on one of the IntelliMap 502C's most remarkable capabilities — Searching. We'll introduce a search...
  • Page 9 Case size:... 5.4" H x 6.9" W x 3.4" D (13.8 x 17.6 x 8.6 MMC slots: ... One with waterproof door (SD card Recording:... MMC & SD cards for recording GPS trip de- Back-up memory: ... Built-in memory stores GPS data for dec- Languages:...

  • Page 10: How Gps Works

    How GPS Works You'll navigate faster and easier if you understand how the IntelliMap 502C scans the sky to tell you where you are on the earth – and, where you're going. (But if you already have a working understanding of GPS receivers and the GPS navigation system, skip on ahead to Section 2, Installation &...
  • Page 11 GPS Data Files (file format *.usr) can be shared be- tween Eagle GPS or sonar/GPS units or even personal computers. This IntelliMap 502C has one more thing in common with a personal computer. Just as computers have a floppy disk drive for storing and ex- changing files, the unit has a slot for an MMC (MultiMedia Card) or SD card (Secure Digital card) flash memory card.

  • Page 12: Introduction To Gps And Waas

    Section 2, Installation & Accessories, on page 11, so you can mount your IntelliMap 502C and plug in the power. Or you might want to see how our text formatting makes the manual tuto- rials easy to skim.
  • Page 13 Speed, direction of travel, and distance are all calculated from position information. Therefore, in order for the IntelliMap 502C to determine direction of travel, you must be moving and the faster, the better. This is not to say that it won’t work at walking or trolling speeds —...

  • Page 14: How To Use This Manual: Typographical Conventions

    only a tool. Always have another method of navigation available, such as a map or chart and a compass. Also remember that this unit will always show navigation information in the shortest line from your present position to a waypoint, regardless of terrain! It only calculates position, it can’t know what’s between you and your destination, for example.
  • Page 15 4. The wait message disappears and the IntelliMap 502C begins show- ing navigation information along the trail. Now, begin moving and fol- low your IntelliMap 502C. Translated into complete English, step 1 above would mean: "Start on the Map Page. Press the Menu key twice. Next, repeatedly press (or press and hold) the down arrow key to scroll down the menu and select (highlight) the My Trails menu command.
  • Page 16 Notes...

  • Page 17: Section 2: Installation & Accessories

    Power Connections The IntelliMap 502C works from a 12-volt battery system. For the best results, attach the power cable directly to the battery. You can attach the power cable to an accessory or power bus, but you might have problems with electrical interference.
  • Page 18 This will protect both the unit and the power cable in the event of a short. It uses a 3-amp fuse. Power connections for the IntelliMap 502C GPS unit. WARNING: This product must be independently fused with the en- closed 3-amp fuse (or equivalent), even if you connect to a fused accessory or power buss.
  • Page 19 CAUTION: Failure to use the enclosed 3-amp fuse will void your warranty! For a replacement, use a type 3AG 3-amp fuse. This unit has reverse polarity protection. No damage will occur if the power wires are reversed. However, the unit will not work until the wires are attached correctly.

  • Page 20: Nmea Cable Connections

    NMEA-compatible device. Mounting the Unit: Bracket or Portable You can install the IntelliMap 502C on the top of a dash with the sup- plied gimbal bracket. It can also be mounted on a portable power supply. If you use the supplied bracket, you may be interested in an optional ...
  • Page 21 GPS antenna can lock-on to the satellite signals. You should also make sure there is enough room behind the IntelliMap 502C to attach the power cable. (a drawing on the next page shows the dimensions of a gim- bal-mounted IntelliMap 502C.)
  • Page 22 Intel- liMap 502C. If you choose to fill in the hole, be sure to position the cable against the rear edge of the hole as you apply the fill material.

  • Page 23: Mmc Or Sd Card Memory Card Installation

    Installing batteries in a typical portal power pack. MMC or SD Card Memory Card Installation Your IntelliMap 502C uses a MultiMedia Card to store information, such as custom maps, waypoints, trails and other GPS data. The unit can also use Secure Digital Cards (SD card or SDC) to store data.

  • Page 24: Other Accessories

    Additional MMC cards are available from LEI Extras; see ordering in- formation inside the back cover of this manual. MMCs and SD cards are also available at many camera and consumer electronics stores. The MMC slot is located in a compartment on the front of the case. The compartment door is located at the lower right corner.
  • Page 25 MapCreate™ 6 CD-ROM, left; MMC card reader for USB ports, right. Now that you have your IntelliMap 502C installed, move on to Section 3, Basic GPS Operations. There, we'll present a series of step-by-step tutorials to teach you the basics of GPS navigation.
  • Page 26 Notes...

  • Page 27: Section 3: Basic Gps Operations

    Quick Reference on page 34. Keyboard MMC slot access door IntelliMap 502C GPS unit, front view, showing Map Page, keyboard 1. PWR/LIGHT (Power & Light) – The PWR key turns the unit on and off and activates the backlight.

  • Page 28: Power/Lights On And Off

    3. MENU – Press this key to show the menus and submenus, which allow you to select a command or adjust a feature. This also accesses search functions for streets, intersections, addresses and highway exits. 4. ARROW KEYS – These keys are used to navigate through the menus, make menu selections and move the map cursor.
  • Page 29 Point of Interest or map cursor location; or after you reach the end of a route or trail. GPS Setup command: sets various GPS receiver options. System Setup command: sets general configuration options. Sun/Moon Calculations command: finds the rising and setting time of the sun and the moon.

  • Page 30: Satellite Status Page

    Pages The unit has three Page displays that represent the three major oper- ating modes. They are the Satellite Status Page, the Navigation Page and Map Page. They are accessed by pressing the ing → or ← to select a Page. (Clear the Pages Menu by pressing Pages Menu, showing some Map display options.
  • Page 31 You can use this to see which satellites are obstructed by obstacles in your immediate area if the unit is facing north. The GPS receiver is tracking satellites that are in bold type. The re- ceiver hasn't locked onto a satellite if the number is grayed out, there- fore it isn't being used to solve the position.

  • Page 32: Navigation Page

    The Satellite Status Page has its own menu, which is used for setting various options. (Options and setup are discussed in Sec. 5). To access the Satellite Status Page Menu, from the Status Page, press Navigation Page This screen has a compass rose that not only shows your direction of travel, but also the direction to a recalled waypoint.
  • Page 33 Speed instead. Closing Speed is also known as velocity made good. It's the speed that you're making toward the waypoint. For instructions, see the Customize Page Displays entry in Sec. 5.) Track is the heading, or the current direction you are actually travel- ing.

  • Page 34: Map Page

    course. You need to steer left to return to the desired course. You can use the keys to change the cross track error range. ZOUT A circular symbol depicting your destination (waypoint) appears on the screen as you approach the waypoint, as shown on the screen in the preceding figure.
  • Page 35 The Zoom In and Zoom Out keys zoom the map to enlarge or reduce its coverage area and the amount of mapping detail shown. There are 40 available map zoom ranges, from 0.02 miles to 4,000 miles. Map Page (left) opening screen. The center image is zoomed to 100 miles and at right zoomed to 10 miles.

  • Page 36: Background Map Vs. Mapcreate Map Content

    revealing more map content (except for a few major city streets.) Load your own high-detail custom map made with MapCreate (or a pre-made FreedomMap from LEI), and you can zoom in to 0.02 miles with mas- sive amounts of accurate map detail. Background map vs.
  • Page 37 Interstate Minor Streets Marker School When the map is zoomed out far enough, most POIs appear as square dots. As you zoom in closer, the symbols become readable icons. In the 0.2 mile zoom example at right, the cursor has selected the Cupps Café POI, which triggers a pop-up box with the POI name.

  • Page 38: Resize Window Command

    Digital Data map page option. In pages that have two major windows (such as two maps) you can tog- back forth between windows pressing . This allows you to change which map your cursor PAGES PAGES moves on, and which map the menu operates on. Pages Menu with Two Map option selected, left.
  • Page 39 the window widths. Press an arrow key parallel to the centerline to switch between horizontal and vertical layout. Press to clear the four flashing arrows. EXIT Fig. 1. From left to right: Fig. 1. Two Maps page display with four flashing arrows on the dividing centerline.

  • Page 40: Basic Gps Quick Reference

    Basic GPS Quick Reference Start outdoors, with a clear view of the open sky. As you practice, try navigating to a location at least a few blocks away. While you're learning, navigation in too small an area will constantly trigger arrival alarms. 1.

  • Page 41: Find Your Current Position

    Find Your Current Position Finding your current position is as simple as turning the unit on. Un- der clear sky conditions, the unit automatically searches for satellites and calculates its position in approximately one minute or less. NOTE: "Clear sky" means open sky, unobstructed by terrain, dense foliage or structures.

  • Page 42: Selecting Any Map Item With The Cursor

    Distance measured by cursor Cursor line The selected wreck (the Empress) to the southeast is 12.81 miles away. Selecting Any Map Item with the Cursor 1. Use the zoom keys and the arrow keys to move around the map and find the item you wish to select.
  • Page 43 After the unit has acquired a position: 1. Press |↓ to POI-R ESTAURANTS 2. You could search the entire restaurant category, but in this example we will narrow our search. Press → to HAINS 3. The unit says it is calculating, then a list of restaurants appears, with the closest at the top of the list, and the farthest at the bottom of the list.
  • Page 44 POI information screen on fast food restaurant nearest this position. Screen shows name, street address, phone number, latitude/longitude, distance to restaurant and its compass bearing. The left figure shows Go To waypoint command while the right figure shows Find On Map Map screen showing Finding Waypoint, NOTE: Search works from mapping and POI data loaded in the unit.

  • Page 45: Set A Waypoint

    Set a Waypoint A waypoint is simply an electronic "address," based on the latitude and longitude of a position on the earth. A waypoint represents a location, spot, or destination that can be stored in memory, then be recalled and used later on for navigation purposes.
  • Page 46 Step 1. Step 3. Sequence for setting a waypoint. Step 1: while traveling, quickly press WPT twice to call up Find Waypoint screen (seen in Step 2) and set a point. Step 3: message says the waypoint has been saved. Step 4: vehi- cle continues on its way;...

  • Page 47: Navigate To A Waypoint

    3. Press ↓ to ATITUDE change the first character, then press → to the next character and re- peat until the latitude is correct. Press 4. Press ↓ to ONGITUDE change the first character, then press → to the next character and repeat until the longitude is correct.

  • Page 48: Set Man Overboard (Mob) Waypoint

    Course line (red) Off course range, set at 0.15 mile Navigation Page, navigating toward waypoint 001 and leaving a trail. Set Man Overboard (MOB) Waypoint One of boating's most terrifying events is having a friend or family member fall overboard. This situation can be deadly on any body of wa- ter —...

  • Page 49: Navigate To Cursor Position On Map

    Navigating to Man Overboard: "Man Overboard activated" message shown at left. The Navigation Page is shown in the center and Map Page is shown at right. The victim is astern of the vessel; the GPS shows which direction to steer to for the rescue. The man overboard position is also stored in the waypoint list for future reference.
  • Page 50 Navigate to cursor. In this example, the cursor has selected 3. Press MENU cation. The Map Page will display a red line from your current position to the cur- sor position. The Navigation Page displays a compass rose showing naviga- tion information to your destination.

  • Page 51: Navigate To A Point Of Interest

    Navigate to a Point of Interest For POIs that are in view on the map, you can easily use the Navigate to Cursor command above; just use the cursor to select the POI. The other method involves searching for POIs with the Find Waypoint command, launched with the lier in this section, or turn to Sec.
  • Page 52 Visible Active symbol symbol Sequence for saving a trail and beginning a new one. At left, My Trails command. Center, the Trails Menu. The arrow to the right of Trail 3 indicates the trail is "active," and the check to the left indicates the trail is visible on the map display.

  • Page 53: Displaying A Saved Trail

    You can save and recall up to 10 different plot trails, which can also be copied to your MMC for archiving or for transfer to your MapCreate software. Tip: Another quick way to stop recording one trail and begin a new one is to use the New Trail command: Press RAILS Caution:...

  • Page 54: Visual Trailing

    The other two methods provide a full range of navigation data and work with both the Map Page and Navigation Page. The only difference be- tween them is "navigating a trail" follows a trail forward (from start to end) while "backtracking" follows a trail in reverse (from end to start.) When hiking at walking speed with a hand-held GPS, we often just use visual back trailing because it is a bit better at following each little turn on a foot path.
  • Page 55 Figure 1. Figure 2. Figure 4. Figure 3. Navigate a trail menu sequence: Fig. 1, My Trails command. Fig. 2, Trails Menu. Fig. 3, Edit Trail Menu. Fig. 4, Edit Route Menu with Navigate Route command highlighted for Trail 1. A trail is always con- verted to a "route"...

  • Page 56: Navigate A Back Trail (Backtrack, Or Reverse)

    Present position arrow Trail point Navigate trail, map views: at left driver is heading southeast straight toward trail point 3. At right, driver has reached point 3 and has turned southwest to follow the trail. Track or compass heading indicator Trail waypoint symbol...

  • Page 57: Transfer Custom Maps And Gps Data Files

    4. Press → to EVERSE begins showing navigation information along the trail, in reverse. NOTE: If you are already located at or near the end of your trail, the arri- val alarm will go off as soon as you hit Enter. Just press clear the alarm and proceed.
  • Page 58 The Transfer My Data submenu asks if you want to save data to the MMC or load data from the MMC into the unit's memory. 2. The Transfer My Data menu includes a message which tells you if an MMC is present or not. If no MMC is present, you must first insert a card into the unit in order to activate the Load or Save commands.

  • Page 59: Cancel Navigation

    4. Loading to unit memory: There may be more than one GPS Data File (*.USR) on the card. To select a file, press to activate the selec- tion box, use ↓ or ↑ to highlight the file, then press to accept the selection.
  • Page 60 Notes...

  • Page 61: Section 4: Advanced Gps Operations

    Advanced GPS Operations Find Distance From Current Position To Another Location 1. While on the Map Page press: 2. Center your cursor over the position you want to find the distance to. A rubber band line appears, connecting your current position to the cursor's location.

  • Page 62: Icons

    Icons Icons are graphic symbols used to mark some location, personal point of interest or event. They can be placed on the map screen, saved and re- called later for navigation purposes. These are sometimes referred to as event marker icons. This unit has 42 different symbols you can pick from when creating an icon.

  • Page 63: Delete An Icon

    Delete an Icon You can delete all the icons at one time, you can delete all icons repre- sented by a particular symbol, or you can use the cursor to delete a se- lected icon from the map. 1. Press |↓...

  • Page 64: Create And Save A Route

    The course from one waypoint to the next is a leg; routes are composed of one or more legs. The legs of all GPS routes are based on straight lines between waypoints. A route provides the automatic capability to navigate through several waypoints without having to reprogram the unit after arriving at each waypoint.
  • Page 65 Route Planning command on Main Menu, left, will open the Route List screen, right. 2. If necessary, press ↑ to select , then press . (To add to OUTE an existing route, press ↓ or ↑ to route name| 3. Press ↓ to |↓...
  • Page 66 Route creation sequence, from left: Fig. 1. Set route waypoint (1) at the cove entrance. Fig. 2. Move cursor northeast to set point (2) at channel entrance. Fig. 3. With point (2) set, move cursor southeast to mark channel exit with waypoint (3). In figures 2 and 3, notice the rubber band line extending from the previously set waypoint to the cursor.

  • Page 67: Delete A Route

    8. To save your route, press screen, with the route automatically named "Route 1" and stored in the unit's internal memory. You can edit the route and run other commands, but if you are finished with the route for now, return to the last page displayed by pressing EXIT EXIT...

  • Page 68: Navigate A Route

    3. Use ↓ and ↑ to select a command from the Edit Route Waypoints menu and press route by clicking on a map location with the cursor. Add Waypoint calls up the Waypoint List so you can insert a waypoint from the list. Re- move Waypoint will delete the waypoint from the route.

  • Page 69: Navigate A Route In Reverse

    Route Planning command on Main Menu, left; Routes menu, center; Edit Route menu, right. Navigate Route command is selected. 2. Press ↓ to select route name| Upon arrival press |↓ to MENU MENU The following figures show what the Navigation Page and Map Page look like while navigating a route.

  • Page 70: Trails

    Figure 1. Navigating along a route: Fig. 1 shows the Navigation Page at the start of a route, heading straight for the first waypoint (Wpt 1). In Fig. 2, the traveler has arrived at Wpt 1; the arrival alarm has been trig- gered and the bearing arrow on the compass rose has turned to point Figure 3.

  • Page 71: Edit A Trail Name

    Tip: You can also delete all trails at once: 1. Press MENU 2. Press → to Edit a Trail Name To edit a trail name: press . Press ↑ or ↓ to change the first character, then press name| → to the next character and repeat until the name is correct. Press then EXIT EXIT...

  • Page 72: Utilities

    Edit Trail Menu (left) with Pattern option selected. Edited trail with dotted line pattern is shown at right. Utilities Utilities are useful tools for traveling or for outdoor activities. Alarm Clock To get to the alarm clock menu: press LARM LOCK Sun/Moon Rise &...

  • Page 73: Edit A Waypoint

    2. Press |→ to the previous page and clear the cursor, press To delete all waypoints at one time: press |↓ to ETUP ELETE to the previous page, press Edit a Waypoint Waypoint Name To edit waypoint name: 1. Press |↑...

  • Page 74: Set A Waypoint By Average Position

    Set a Waypoint by Average Position This feature sets a waypoint at the current position after taking several position readings and averaging them. This boosts waypoint position accuracy by helping to eliminate errors caused by atmospheric condi- tions and other factors. 1.

  • Page 75: Section 5: System & Gps Setup Options

    Section 5: System & GPS Setup Options Alarms This unit has several GPS alarms. The factory default setting has all of these but the anchor alarm turned on. You can turn the alarms off and on and change their distance settings. You can set an arrival alarm to flash a warning message and sound a tone when you cross a preset distance from a waypoint.

  • Page 76: Check Mmc Files And Storage Space

    3. To change distance settings, scroll gory, then press → | ↓ to change the first character, then press → to the next character and repeat until the name is correct. 4. When your adjustments are finished, return to the last page dis- played by repeatedly pressing IMPORTANT ALARM NOTES: Anchor Alarm - The anchor alarm may be triggered even when...

  • Page 77: Configure Nmea

    Menus for changing Com Port settings. For connectors and wiring information for another device, see page 14. For assistance in configuring the unit to communicate with another device, consult the factory; customer service phone numbers are in the back of this manual. Also see the entry below for Configure NMEA. To set Com Port Configuration: 1.

  • Page 78: Coordinate System Selection

    • GSA and GSV transmits fix mode, DOP values, and satellites in view information. • DBT transmits the depth below the transducer. • DPT transmits the depth • MTW transmits the water temperature. • VLW transmits the distance traveled through water as meas- ured by the paddle wheel.

  • Page 79: To Setup Loran Td

    UTM's are marked on USGS topographic charts. This system divides the Earth into 60 zones, each 6 degrees wide in longitude. British, Irish, Finnish, German, New Zealand, Swedish, Swiss, Taiwan, and Greek grid systems are the national coordinate system used only in their respective countries.

  • Page 80: Customize Page Displays

    Customize Page Displays Every Page display option except Full Map (on the Map Page) has cus- tomizable data boxes to provide constant on-screen information. The various data available from your unit are divided into categories in the Data Viewer menu. These categories include GPS Data, Navigation, Trip Calculator and Time.

  • Page 81: Gps Simulator

    GPS Simulator The GPS simulator lets you use the unit as if you were outdoors navi- gating somewhere. It's a great way to practice using your unit. You can set the starting location by entering latitude/longitude (Starting Posi- tion) or from a stored waypoint, map place or POI location ( command).

  • Page 82: Simulating Trail Or Route Navigation

    Simulating Trail or Route Navigation In Simulator mode, your unit can automatically follow a trail or route without manual steering if you use these steps: 1. From the Map Page, go to the simulator menu. Pick a at or near the beginning of your trail/route. Enter an approxi- OSITION mate (shown in compass degrees) that will point you toward the...

  • Page 83: Map Auto Zoom

    Map Auto Zoom This receiver has an auto zoom feature that eliminates much of the but- ton pushing that other brands of GPS receivers force you to make. It works in conjunction with the navigation features. First, start navigation to a waypoint. (See the waypoint section for more information on navigating to a waypoint.) Then, with the auto zoom mode on, the unit zooms out until the entire course shows, from the present position to the destination waypoint.

  • Page 84: Pop-Up Map Information

    Pop-up Map Information From the Map Page, press . With the option highlighted, press NFORMATION on) and uncheck it (turn off.) After the option is set, press return to the page display. Map Boundaries From the Map Page, press . With the option highlighted, press OUNDARIES on) and uncheck it (turn off.) After the option is set, press return to the page display.

  • Page 85: Map Detail Category Selection

    ated using different datums will show the same latitude/longitude in slightly different locations. All datums are named. The GPS system is based on the WGS-84 da- tum, which covers the entire world. Other datums may also cover the entire world, or just a small portion of it. By default, your position shows using the WGS-84 datum.

  • Page 86: Map Fix

    Map Fix Map Fix is used with charts or maps. This system asks for a reference position in latitude/longitude, which you take from a marked location on the map. It then shows the present position as distance on the map from that reference point.

  • Page 87: Map Orientation

    Configure a map fix so the unit can find your position on a printed chart or topographical map. Press → to ELECT Select the waypoint (or a landmark of POI) that you saved the reference point under and press screen with the command returns to the Configure Map Fix menu.

  • Page 88: Nauticpath Usa Marine Charts

    This is fine if you're always traveling due north. What you see to your left corresponds to the left side of the map, to your right is shown on the right side of the map, and so on. However, if you travel any other direction, the map doesn't line up with your view of the world.

  • Page 89: Nautical Chart Notes

    To view Chart Note information: 1. Use the arrow keys to move the cursor over a Chart Note icon. When it's selected, a pop-up name box appears. 2. Press to display the Note Information screen. 3. To scroll through the Chart Note screen, use ↑ ↓ arrow keys to read the information.

  • Page 90: Tidal Current Information

    Port Services icon NauticPath chart showing Port Services icon selected by cursor. When first highlighted, the Pop-Up name box appears. Tidal Current Information NauticPath charts contain Tidal Current information, represented at large zoom ranges by a box icon with the letter "C." These icons will appear when you are zoomed in to a 6-mile range.
  • Page 91 Cursor lines NauticPath chart showing Tidal Current Station icon selected by cur- sor (left). Icon animates automatically at .08-mile zoom range (right). Current Time Line Velocity Scale The Tidal Current Information screen displays daily tidal current data for this station on this date at the present time. The graph at the top of the screen is an approximate view of the flood and ebb pattern for the day, from midnight (MN), to noon (NN) to midnight (MN).
  • Page 92 To select another date: 1. Use ← → to highlight month, day or year, then press 2. Use ↑ ↓ to select the desired month, day or year and press To clear the information screen, press Tide Information NauticPath charts represented at large zoom ranges by a box icon with the letter "T."...

  • Page 93: Navionics Charts

    Current Time Line MLLW Line Tide Table The Tide Information screen displays daily tidal data for this station on this date at the present time. The graph at the top of the screen is an approximate view of the tidal range pattern for the day, from midnight (MN) to noon (NN) to midnight (MN).

  • Page 94: Overlay Data

    2. From the Map Page, press . Select the Map Name, then press HOICE WARNING: You should never format the MMC containing your Navionics chart. Formatting the MMC will permanently erase the chart from the card. Overlay Data On any Page display but Status you can float additional data of your own choosing in your display window.
  • Page 95 Selecting the category name and pressing contents, so you can choose items within it. An expanded category (one with a "–" next to its name) can be collapsed to hide its contents, and make more room on your screen. Just select the category name and press 3.

  • Page 96: Pop-Up Help

    Overlay Data Shown, with Date option selected (left). Press ENT to ac- cess R option (center). Press ENT again to remove item and return EMOVE To move overlaid data: You may find it useful to rearrange data that is floating in your display window.

  • Page 97: Position Pinning

    System Setup Menu (left) with Pop-up Help command highlighted. The example at right shows the Pop-up Help message for the Initialize GPS command, located on the Status Page menu. Position Pinning When you are standing still or moving at extremely slow speed, a GPS receiver can have trouble determining the direction you are traveling.

  • Page 98: Require Waas

    System Menu with Reset Options command selected. Require WAAS You can force the unit to require WAAS for reporting a valid position. (The default setting, off, uses WAAS automatically, but doesn't require it to yield a position.) Here's how to turn it on and off: 1.

  • Page 99: Set Language

    slider bar is already selected. Press → or ← to move the ONTRAST bar. The left end of the scale is minimum contrast; the right end is maximum contrast. Screen Command, left, and Screen Menu with Contrast bar selected, right. To adjust the display's brightness: Press ↓...

  • Page 100: Set Local Time

    2. Press ↓ to ANGUAGE 3. Use ↓ or ↑ to select a different language and press now appear in the language you selected. Set Local Time Using the correct local time setting is handy when estimating local ar- rival time while navigating. Also, the time and date are saved when a waypoint is created.

  • Page 101: Software Version Information

    2. With the option highlighted, press to uncheck it (turn off) and check it (turn on.) After the option is set, press to return to EXIT EXIT the page display. 3. You can return to this command and press again to turn the fea- ture on.

  • Page 102: Track Smoothing

    Sounds command (left) and the Sounds menu shown at right. Once in the Sounds menu: To set Key Press Sounds: With the option highlighted, press check it (turn on) and uncheck it (turn off.) After the option is set, press to return to the page display.

  • Page 103: Trail Options

    Trail Options There are several options you can use with trails. Some affect all trails, other options can be applied to a particular trail. You can change the way trails are updated, display or hide trails, create a new trail, delete a trail, etc.

  • Page 104: Delete Trail

    From the Trails Menu, press ↓ to Press ← or → to select criteria type| Trail Update Rate (Time, Distance) You can update a trail by time, with a range from 1 second to 9999 sec- onds; the default is 3 seconds. You can update by distance, with a range from 0.01 mile/nm/km to 9.99 mile/nm/km;...

  • Page 105: New Trail

    Edit Trail menu. New Trail To manually start a new trail, in the Trails Menu, make sure RAIL is highlighted and press Trail Visible/Invisible and Other Trail Options The name, maximum number of points in the trail, activity, and visi- bility are all changed on the Edit Trail menu screen.

  • Page 106: To Adjust Menu Transparency Level

    Main Menu with Transparency command selected. To adjust Menu Transparency level: Press |↓ to . The slider bar MENU MENU RANSPARENCY RANSPARENCY appears. Press ↑ or ↓ to move the bar. The lower end of the scale makes the menus opaque; the upper end is maximum transparency. Units of Measure This menu sets the speed and distance (statute or nautical miles, me- ters), depth (feet, fathoms, or meters), temperature (degrees Fahrenheit...

  • Page 107: Section 6: Searching

    Section 6: Searching NOTE: The background map loaded in your unit lets you to search for U.S. Interstate Highway exits and exit services, as well as some land features, including cities and lakes. For a full set of searchable land features, including landmarks, streets, addresses and Points of In- terest, you must load your own high-detail custom map produced with our MapCreate 6 software.

  • Page 108: Find Addresses

    In search results, the distance and bearing to the selected item will be calculated from the current position. In the case of a cursor search, the search results show distance and bearing from the cur- sor, but an individual waypoint's information screen shows distance and bearing from the current (or last known) position.
  • Page 109 Find Address menu, left; Find Street menu, center, with Find By Name field active; street name entry complete, right. 5. To enter a city name, press ↓ to want to find addresses only within a particular city. This option is de- signed so you can limit an address search to a single city if necessary (see the following note).
  • Page 110 6. When the necessary search fields are filled in, press ↓ to . Your unit asks you to wait while it searches for the ad- DDRESS dress. (If an address is not in the database, a message appears saying the address could not be found.) 7.

  • Page 111: Find Any Item Selected By Map Cursor

    Left, Map Page showing location of the address on the map, high- lighted by cursor. Center, this address is a business in the POI data- base, so you can display the POI information window, then navigate to it. At right, this address is not in the POI database, so the Waypoint key will not display any information for this address.
  • Page 112 Find Highway Exits command (left) and Find Exit menu at right. 2. First, select a highway name by pressing , which calls up the Find By Name menu. There are two highway search options: A. You can spell out the highway name in the top selection box. Press ↑ or ↓ to change the first letter, then press →...
  • Page 113 Find Exit menu, with an exit selected in the Exit List. 4. In the Exit Information screen you have two choices. A. Press navigate or "go to" the exit. B. Press →| "Go To Exit" option, left, "Find On Map" option, right. Tip: You can also look up some additional information on the Exit Serv- ices located near this exit.

  • Page 114: Find Map Places Or Points Of Interest (Poi)

    Exit Information screen, left; general location and amenities information, at right. Find Map Places or Points of Interest (POI) ↓ ↑ 1. Press , press to select a map place or POI category, then . (To narrow your search, press → or ← to select a subcate- press gory before pressing .) You will be given two options;...
  • Page 115 Find by Nearest option (left), Calculating screen (center) and the POI list at right. 3. Search by name of POI. Press ↓ to . There are two op- tions: A. You can spell out the POI in the top selection box. Press ↑ or ↓...

  • Page 116: Find Streets Or Intersections

    "Go To" POI option, left, "Find on Map" POI option, right. Find Streets or Intersections Find a Street 1. From the Map Page, press |↓ to and the Find MENU TREETS Streets Menu appears. Find Streets command, left, Find Streets menu, right. 2.
  • Page 117 Find Street By Name menu. Spell out name in the top box, or select from the list in the lower box. 3. The Find Streets menu reappears with the street you're searching for in the First Street box. (In this example, it's I-35.) To search for that street, press ↓...

  • Page 118: Find An Intersection

    Map Page showing results of a street search. The cursor points to the located street. If you want to navigate to the found street at the cursor location, just press MENU EXIT Find an Intersection You must enter one street in the First Street dialog box and enter the next street in the Second Street dialog box.
  • Page 119 5. The Find Streets menu reappears with the first and second street dialog boxes filled in. In this example, we selected I-44 as our second street. You could now use similar techniques to select a city or Zip code, but your search will probably be faster if you leave those boxes blank. (You can specify a city and/or Zip code later on to narrow the search, if the resulting list is too long.) Find Intersection command highlighted, left.

  • Page 120: Find Waypoints

    If you want to navigate to the found intersection, just press MENU EXIT Find Waypoints 1. Press |↑ to AYPOINTS 2. If searching for the Nearest waypoint, press . If searching for the waypoint By Name, press to ↓ . (To search by name, jump to step 5.) Find Waypoint menu, left;...
  • Page 121 4. To see location information on the closest (highlighted) waypoint, press and the Waypoint Information screen appears. If you wanted to, you could select another waypoint from the list with the ↑ or ↓ keys. A. To navigate to the waypoint, press command is already highlighted.) The unit will show navigation infor- mation to the waypoint.
  • Page 122 Find By Name menu, left. Waypoint Information screen, center. At right, the found waypoint is highlighted by cursor on Map Page. A. To navigate to the waypoint, press is already highlighted.) The unit will show navigation information to the waypoint. B.

  • Page 123: Section 7: Supplemental Material

    Section 7: Supplemental Material Datums Used by This Unit WGS 1984 Default Adindan Mean for Ethiopia, Sudan Adindan Burkina Faso Adindan Cameroon Adindan Ethiopia Adindan Mali Adindan Senegal Adindan Sudan Afgooye Somalia Ain el Abd 1970 Bahrain Ain el Abd 1970 Saudi Arabia Anna 1 Astro 1965 Cocos Islands...
  • Page 124 Chua Astro Paraguay Corrego Alegre Brazil Dabola Guinea Djakarta (Batavia) Indonesia (Sumatra) DOS 1968 New Georgia Islands (Gizo Island) Easter Island 1967 Easter Island European 1950 Mean for Austria, Belgium, Denmark, Finland, France, West Germany, Gi- braltar, Greece, Italy, Luxembourg, Neth- erlands, Norway, Portugal, Spain, Sweden, Switzerland...
  • Page 125 Naparima BWI Trinidad & Tobago North American 1927 Mean for Antigua, Barbados, Barbuda, Caicos Islands, Cuba, Dominican Republic, Grand Cayman, Jamaica, Turks Islands North American 1927 Mean for Belize, Costa Rica, El Sal- vador, Guatemala, Honduras, Nicaragua North American 1927 Mean for Canada North American 1927 Mean for CONUS...
  • Page 126 Point 58 Sweden Santo (DOS) 1965 Espirito Santo Island Sao Braz Azores (Sao Miguel, Santa Maria Islands) Sapper Hill 1943 East Falkland Island Schwarzeck Nambia Selvagem Grande Salvage Islands SGS 85 Soviet Geodetic System 1985 South American 1969 Mean for Argentina, Bolivia, Brazil, Chile, Colombia, Ecuador, Guyana, Paraguay,...

  • Page 127: Fcc Compliance

    FCC Compliance This device complies with Part 15 of the U.S. Federal Communi- cations Commission (FCC) Rules. Operation is subject to the fol- lowing two conditions: (1) this device may not cause harmful in- terference, and (2) this device must accept any interference re- ceived, including interference that may cause undesired opera- tion.
  • Page 128 Notes...
  • Page 129 Notes...
  • Page 130 Notes...
  • Page 131 EAGLE DATABASES LICENSE AGREEMENT THIS IS a LEGAL AGREEMENT BETWEEN THE END-USER WHO FIRST PURCHASES THIS PRODUCT AS a CONSUMER ITEM FOR PERSONAL, FAMILY, OR HOUSEHOLD USE ("YOU") AND EAGLE ELECTRONICS, a DIVISION OF LEI, THE MANUFACTURER OF THIS PRODUCT ("WE", "OUR", OR "US").
  • Page 132 DATABASES LIMITED WARRANTY "We", "our", or "us" refers to Eagle Electronics, a division of LEI, the manufac- turer of this product. "You" or "your" refers to the first person who purchases the product as a consumer item for personal, family, or household use. The Da- tabases Limited Warranty applies to the one or more databases that your prod- uct may contain.
  • Page 133 EAGLE ELECTRONICS FULL ONE-YEAR WARRANTY "We," "our," or "us" refers to EAGLE ELECTRONICS, a division of LEI, the manufac- turer of this product. "You" or "your" refers to the first person who purchases this product as a consumer item for personal, family, or household use. We warrant this product against defects or malfunctions in materials and workmanship, and against failure to conform to this product's written specifications, all for one (1) year from the date of original purchase by you.

  • Page 134: How To Obtain Service

    How to Obtain Service… …in the USA: We back your investment in quality products with quick, expert service and genuine Eagle replacement parts. If you're in the United States and you have technical, return or repair questions, please contact the Factory Customer Service Department.
  • Page 135 Accessory Ordering Information for all countries To order Eagle accessories such as power cables or MMC cards, please contact: 1) Your local marine dealer or consumer electronics store. Most quality dealers that handle marine electronic equipment or other consumer electronics should be able to assist you with these items. To locate an Eagle dealer near you, visit our web site at www.eaglesgps.com or consult your telephone directory for listings.

  • Page 136: Visit Our Web Site

    Visit our web site: www.eaglesonar.com  Eagle Pub. 988-0152-141 Copyright © 2005 All Rights Reserved Printed in USA 121505 LEI-Eagle...

This manual is also suitable for:

Intellimap 502

Table of Contents