Running-In Instructions; Cleaning The Machine - Fayat Group BOMAG BP 10/35 Service Manual

General – Maintenance and repair
Fig. 28

1.3.4 Running-in instructions

1.3.4.1 General
1.3.4.2 After 25 operating hours

1.3.5 Cleaning the machine

42 BP 10/35 / BP 12/40 / BP 12/50 / BVP 10/36 / BVP 12/50 / BVP 18/45
4. Close the fuel valve completely.
5. secure the machine against unauthorized use.
The following maintenance work must be performed when running
in new machines or overhauled engines.
1. Change the engine oil
oil" on page 70.
2. Check engine and machine for leaks.
3. Retighten the fastening screws on air filter, exhaust and other
attachments.
4. Retighten the bolted connections on the machine.
5. Checking the V-belt
belt" on page 81.
6. Check the oil level in the vibrator housing.
NOTICE!
Danger of engine damage caused by reduced
cooling!
– Immediately seal any oil or fuel leaks near fuel
tank, cylinder or cooling air intake.
1. Park the machine in secured condition
„Parking the machine in secured condition" on page 41.
2. Allow the engine to cool down for at least 30 minutes.
Ä Chapter 4.1.2 „Changing the engine
Ä Chapter 4.1.8 „Servicing the V-
Ä Chapter 1.3.3