Servicing The V-Belt - Fayat Group BOMAG BP 10/35 Service Manual

Fig. 61
A View from underneath: Alignment
of filter during installation
Fig. 62

4.1.8 Servicing the V-belt

1
Fig. 63
BP 10/35 / BP 12/40 / BP 12/50 / BVP 10/36 / BVP 12/50 / BVP 18/45
3. Disassemble filter bowl (3), O-ring (2) and filter (1).
4. Clean filter bowl and filter in a non-inflammable solvent, dry
thoroughly after.
5. Check the O-ring for damage, replace if necessary.
6. Assemble the filter.
Observe the alignment (A) of the filter on the housing.
7. Assemble the filter bowl with the O-ring.
8. Open the fuel valve and check the filter bowl for leaks.
9. Close the fuel valve again.
10. Dispose of fuel environmentally.
Protective equipment:
1. Park the machine safely
machine in secured condition" on page 41.
2. Allow the engine to cool down.
3. Loosen the fastening screws (2) and remove the V-belt guard
(1).
2
B-230-0072
Machine assemblies – Engine
n Working clothes
n Safety shoes
n Protective gloves
Ä Chapter 1.3.3 „Parking the
81