Loading/Transporting The Machine - Fayat Group BOMAG BP 10/35 Service Manual

General – Concerning your safety
1.2.4.4 Safety regulations and environmental protection regulations for handling fuel stabiliser

1.2.5 Loading/transporting the machine

16 BP 10/35 / BP 12/40 / BP 12/50 / BVP 10/36 / BVP 12/50 / BVP 18/45
WARNING!
Danger of burning by ignited fuel stabilizer!
– Do not allow fuel stabilizer to come into contact
with hot components.
– Smoking and open fire is prohibited.
WARNING!
Health hazard caused by contact with fuel sta-
bilizer!
– Wear your personal protective outfit (protective
gloves, protective clothing).
– Do not inhale any fuel stabilizer fumes.
– Do not swallow fuel stabilizer.
– Avoid contact with fuel stabilizer.
ENVIRONMENT!
Fuel stabilizer is an environmentally hazardous
substance!
– Immediately bind spilled fuel stabilizer with an
oil-binding agent and dispose of according to
regulations.
– Dispose of fuel stabilizer according to regula-
tions.
Make sure that persons are not endangered by the machine tipping
or sliding off.
Do not use damaged or in any other way impaired lashing points.
Always use appropriate lifting and lashing means on the lifting and
lashing points.
Use lifting and lashing gear only in the prescribed direction of load
application.
Lifting tackle must not be damaged by machine components.
Secure the machine on the transport vehicle against rolling, slip-
ping and turning over.
Loads must only be attached and hoisted by an expert / capable
person.
Use only lifting gear and lifting tackle with sufficient load bearing
capacity for the weight to be loaded.
Fasten the lifting gear only at the specified lifting points.