Fayat Group BOMAG BP 10/35 Service Manual page 88

Machine assemblies – Exciter unit
5 Grooved ball bearing
6 Radial seal
7 V-belt pulley
Pre-assembling the exciter shaft
1
3
S-692-0084
Fig. 81
1 2
S-692-0085
Fig. 82
90 BP 10/35 / BP 12/40 / BP 12/50 / BVP 10/36 / BVP 12/50 / BVP 18/45
1. Preheat the grooved ball bearing (1)Ä Fig. 81, grooved ball
bearing (2) and the inner ring (3).
2
2. Install the preheated grooved ball bearing (1) Ä Fig. 82 and
the grooved ball bearing (2) on the exciter shaft.
3. Install the inner ring (4) on the exciter shaft.
4
3