Oil For Exciter Shaft Housing - Fayat Group BOMAG BP 10/35 Service Manual

Technical data – Fuels and lubricants
2.4.2.2 Fuel stabilizer

2.4.3 Oil for exciter shaft housing

58 BP 10/35 / BP 12/40 / BP 12/50 / BVP 10/36 / BVP 12/50 / BVP 18/45
If the machine is only occasionally used (if it is out of use for longer
than four weeks), mix in the correct amount of fuel stabilizer
directly after you have purchased fresh fuel.
The fuel stabilizer has a limited shelf life.
Please follow the instructions of the manufacturer concerning the
correct mixing ratio and shelf life.
Mixing in fuel stabilizer does not regenerate old fuel.
Use only engine oils according to the following specifications:
n API CI-4 or higher quality
Avoid mixing engine oils.
NOTICE!
Components may get damaged!
– Do not use low-ash engine oils for the exciter
shaft housing.