Multitek MB-12 User Manual page 16

7.3.2.2 Changing the Door Panel Number
In blocks with more than one Door Panel, the number of each door panel must be
defined separately. DOOR NR is set as 1 in Factory Settings.
This definition is done through the "DOOR NR" option in the Programming screen.
NOTE: For Setting Menus-Programming Screen entry, see "Pages 13-14".
After reaching the DOOR NR option by using the 2-8 keys, press the CALL button.
The current Door Nr is shown on the incoming screen.
You can set the DOOR NR between 1 and 4 by using the 2- 8 keys. You can increase the
No with the 2 key and decrease it with the 8 key. After setting, press the CALL button.
For example: To set the door number as 4, you have to press the 2 key 3 times.
16