Table of Contents
Advertisement
Safety instructions
Power connection and mains plug
Danger!
• Only connect the machine to an electrical connection installed by an
electrician in accordance with IEC 60364-1.
• We recommend connection to a fused socket with a residual current
circuit breaker (max. 30 mA).
• We recommend use of splash water protected sockets according to
DIN VDE 0620-1.
• Make sure that the socket is dry!
• Only touch the mains plug and the mains cable with dry hands.
• Never insert the mains plug into the socket when the floor is wet or damp.
• Never dip the mains cable or mains plug in water or other liquids or clean
it under running water.
• Damp mains plugs or mains plugs that have become wet must no longer
be used. Water can enter the mains plug. Only qualified electricians must
carry out recommissioning.
• Check the mains cable regularly for damage. If damage is detected, the
machine must no longer be used. Have a qualified electrician replace the
mains cable.
• Make sure that no water or liquid can come into contact with live parts of
the machine. If water has still entered parts, immediately disconnect the
mains plug and have the machine checked by the authorised Hako
service.
12
01-7155-00.fm
Advertisement
Table of Contents
