Table of Contents
Advertisement
5.6
Brush unit
1
Fig. 14
5.6.1
Decoupling the brush/pad
1. Tilt the machine backwards into the park position Fig. 14-1.
2. Press the brush decoupling button Fig. 14-2 for approx. 5 seconds.
The time until automatic decoupling is indicated on the display panel.
5.6.2
Coupling the brush/pad
1. Turn on the machine.
2. Tilt the machine backwards into the park position Fig. 14-2.
3. Position the brush/pad centrally to the brush unit Fig. 14-3.
4. Lower the machine onto the brush and actuate the starting handle.
The brush is coupled automatically.
5.6.3
Cleaning the brush
Clean the brush in the brush unit daily or as required.
1. Decouple the brush, see section 5.6.1.
2. Thoroughly clean the brush under running water.
3. Couple the brush, see section 5.6.2.
05-7155-00.fm
Maintenance and servicing
2
3
43
Advertisement
Table of Contents
