Table of Contents
Advertisement
Operation
Brush decoupling button Fig. 3-2
The rotating brush is decoupled with this button.
1. Tilt the machine backwards into the park position.
2. Press and hold the button until the rotating brush has been decoupled.
• The remaining time until decoupling is indicated on the display panel.
Fresh water dosing button Fig. 3-1
The fresh water quantity can be set or switched off in three levels with this
button.
Push the button to increase the water quantity by one level. After reaching
level 3, push the button again to deactivate the water supply. Pushing the but-
ton again activates the water supply with the lowest water quantity (level 1).
Charging state indicator Fig. 3-10
The charging state of the battery is indicated on the display panel during
operation. The number of bars shown indicates the charging state:
• Five green bars visible: Battery is 100 % charged.
• Four green bars visible: Battery is approx. 80 % charged.
• Three green bars visible: Battery is approx. 60 % charged.
• Two green bars visible: Battery is approx. 40 % charged.
• One green bar visible: Battery is approx. 20 % charged.
• One yellow bar visible: Machine can only be operated for approx.
2 minutes.
Charge the battery immediately!
• One red bar visible: Battery is empty. All functions are switched off.
20
02-7155-00.fm
Advertisement
Table of Contents
