Step By Step Programming Continued; Setting The Quantity Of Beverage Per Cup; Setting The Strength Of Beverage Per Cup; Switching The Mixer On Or Off When Tapping Cups - BRAVILOR BONAMAT Bolero 10 Operating Instructions Manual

1.9 Step by step programming (continued)
25. Halt the descaling program
immediately after Point 5:
Within 5 seconds:
The descaling program can be
cancelled by pressing the left-hand side
of the start button à
After 5 seconds:
− Switch off the machine by using
the On/Off switch.
− Press the programming button (3)
and keep this depressed.
− Switch on the machine again. The
machine has now quit the
descaling program and is again
ready to dispense coffee.
WARNING
Never halt the descaling program when
descaling agent has already been
poured into the machine!
1.9.1 S
ETTING THE QUANTITY OF
BEVERAGE PER CUP
1. Select program 'setting the quantity of
beverage per cup'. Figure 8 appears
in the display.
2. Press the right-hand side of the
ß (13) for a larger
setting key
quantity, (maximum approx. 280 ml).
3. Press the left-hand side of the setting
key à
(13) for a smaller quantity,
(minimum approx. 80 ml).
4. The default setting is 120 ml.
Fig. 7
see fig. 7.
,
Fig. 8
1.9.2 S
ETTING THE STRENGTH OF
BEVERAGE PER CUP
1. Select program "setting the strength
of beverage". Figure 9 appears in the
display.
2. Press the right-hand side of the
ß (13) for a larger
setting key
quantity/stronger taste, (max. 25).
3. Press the left-hand side of the setting
key à
(13) for a smaller
quantity/weaker taste, (minimum 1).
4. The default setting is 4.
1.9.3 S
WITCHING THE MIXER ON OR OFF
WHEN TAPPING CUPS
When drawing off both cups and jugs,
you can choose to switch the mixer on or
off. Mixing provides a layer of froth on the
coffee, for example. If you do not want a
layer of froth, then switch off the mixer.
(The mixer spins briefly before stopping.)
Always switch on the mixer when using
ingredients with a high dosage, such as
chocolate. Failing to do so results in
blockages.
Fig. 9
Fig. 10
Fig. 11
7