Table of Contents
Advertisement
2.13 Remove brewer motor
20
Step 1
• remove all colored parts
order of removal:
1. pump bracket, see section "2.11 Remove
pump" on page 18
» no need to disconnect the hoses
2. remove the 2 screws to disconnect the
heater, see section "2.10 Remove flash
heater" on page 17
» no need to disconnect the hoses
3. remove the heater bracket (2 screws)
4. remove the bracket with valves, see
section "2.12 Remove valve set" on
page 19
» only disconnect the hoses to the outlet
and inlet of the brewer
Step 2
• remove the complete CIRCO brewer
Step 3
• remove 4 screws
Advertisement
Table of Contents
