Bartec PBTC-200 Operation And Installation Manual page 33

Operation and Installation Manual PBTC-200
 Set temperature unit (°C or °F) on the changeover switch
 Set the temperature setpoint at the rotary coding switch (enter the 100, 10, 1 digit values, see the minimum/maximum value
from the temperature control range in section 6.2 Operating Data ). Use a 2.5 mm slotted screwdriver
 Mount junction box cover, tighten screws with slotted screwdriver
21-54C3-7D0001/- Notice: Technical data subject to change without notice.
04/2021-EHT-441168 No claims for damage arising from alternations, errors or misprints shall be allowed.
30
31
Page 31 / 45