Operation and Installation Manual PBTC-200
Make sure that all bus wires are intact and not nicked or
damaged.
CAUTION
The silicone adhesive may cause irritation to skin and
eyes. Avoid eye contact. Avoid repeated or prolonged
skin contact. In case of contact with eyes, rinse with
water and seek medical advice.
Put silicone adhesive onto the exposed heating ele-
ment and insulation jacket.
21-54C3-7D0001/-
Notice: Technical data subject to change without notice.
04/2021-EHT-441168
No claims for damage arising from alternations, errors or misprints shall be allowed.
Thread the silicone pants onto the bus wires
Thread the bus wires into the silicone pants.
You might add further silicone adhesive to ensure
optimal sealing.
Slide the silicone pants all the way onto the heating
element.
18
19
20
Page 24 / 45