Operation and Installation Manual PBTC-200
Pull off the bus wires while holding the heating element.
CAUTION
Risk of malfunction of the heating system. Before you continue, make sure that the bus wires are intact and not nicked
or damaged.
Remove any remaining heating element that sticks to the bus wires.
Twist the bus wires
Remove the remaining heating element.
Take care not to damage the bus wires.
21-54C3-7D0001/-
Notice: Technical data subject to change without notice.
04/2021-EHT-441168
No claims for damage arising from alternations, errors or misprints shall be allowed.
Carefully cut in a triangle (5 mm) between the bus wires.
Take care not to damage the bus wires
16
14
15
17
Page 23 / 45