Card Detected By The Digigram Alp-X Manager Application; Card Availability Under Asio - Digigram ALP221e User Manual

User Manual – ALP221e
Note that after the first installation of the card, the default gain settings are as follows:
Digital input and output gains are set to 0 dB
●

7.5 Card detected by the Digigram ALP-X Manager application

The ALP-X Manager application, installed with the driver, is used to control the ALP card settings via
a graphic interface. This application can be launched from the shortcut created on the desktop or
from the start menu, Digigram group. The card must appear as below if it and its driver are installed
correctly. Note that a maximum of eight ALP cards can be displayed and handled in ALP-X Manager.

7.6 Card availability under ASIO

If the ASIO driver for the card has been installed (option to be selected during the installation
procedure), then the card must be detected and displayed in the ASIO control panel.
This control panel can be started from the menu <Start>, <Programs>, <Digigram>, <ALP-X ASIO
Settings>.
15