Peavey TubeFex Operation Manual page 59

PRAM
0 = Left Speed (units)
1
2 = Left Intensitv
Right Intensity
5
Name Buffer Edit
Ten PRAMS each refer to a character position in the name buffer.
PRAM
0 = E f f e c t t y p e
1 = Effect parameter/
Scale Factor (-100 - 100)
5
These Effect type / Parameter Pairs are identical to the pairs listed above. Each of the 2 byte parameters are
referenced by the first PRAM of the pair. Some effects parameters do not have controllers available. An error
message will appear if an unused FXJYPE/Parameter pair is sent.
PRAM
0 Effect 1 level
Effect 2 level
1
Effect 3 level
2
Effect 4 level
Effect level
Effect 6 level
Effect 7 level
7 Effect 8 level
D-8
byte or 2 bytes of data
1
are:
Appendix D Remote Editing with SysEx