Peavey TubeFex Operation Manual page 32

3.
Position the cursor under
preset to dump via MIDI.
4. Press the Exec button to send the preset. The following display is shown:
(Loading a preset to its original location does not require a procedure. Simply send the preset from the
transmitting unit. The Tube Fex will automatically store it in its original location.)
1. Press the Global button until you get to the MIDI screen.
2. Position the cursor under
the channel over which MIDI messages are received. (Make sure the sending unit is set to transmit on
3.
Position the cursor under
preset to receive via MIDI.
4.
Now send the preset to the Tube Fex from the transmitting unit.
If you see:
You need to:
Tutorials
DP;
use the or lefe arrow button. Use the V and A buttons to select the
RC;
use the or left arrow button. Use the V and
TP
use the or left arrow button. LJse the V and A buttons to select the
LP
should SW the following display:
buttons to change
A
33