The
Sh
frequency is adjustable from
Rs
The
(Resonance) parameter adjusts the bandwidth of the midrange frequency.
Range is
0.1 to 4.9.
The Overdrive effect consists of an overdrive type digital distortion. Overdrive is a mono effect.
Parameters
The
(Low Rolloff) parameter is used to adjust the overall tone by rolling off the low frequencies.
LR:
NORML,
PD
The
The Cl (Clip) parameter is a "soft-clipping" control which provides increased sustain. Reducing
Cl:
the clip level increases the sustain. Range is O-99.
Note: As the clip level is reduced, the overall output level of the overdrive is reduced. Therefore,
clip levels will require a large increase in output volume. This can greatly decrease the dynamic range
of the effect and increase noise.
The Lv (Level) parameter adjusts the output level of the Overdrive effect. Range is 0-
Appendix A Individual Effects
Hz
to
900 Hz
300
Overdrive (OD)
(Lo-Roll)
and 0.1 to
1.9
in 10 Hz increments.
.
low
100%.
A-5