Peavey TubeFex Operation Manual page 5

2. Occasiordy, plugging directly into ;I guitar :mplifier may overlod the input slightly. This won't clmxgc
the :tmplifier, lxrt it will cause unwanted distortion of the signal. To cc m-ect this overload cc mdition, ptws
the Global button until the following display appears:
Move the cursor under
until you find a level where the unwanted distortion disappears (this usually h;ippt'ns when the (mtput
the A button. See the section titled Adjusting the Global Input and Output Levels and Global EQ,
on page for more inforniation.
The first parxneter,
the desired channel.
4. Okay. Now it's time to pl;ly.
clockwise until you reach the desired level. The Tube Vex's display will show tlje current p:ltcyh
Out. This ~dlows you to change the output level ofthe Tulx Fcx. Press the v lxltton
sets the MIDI Receive channel. IJse the V and A buttons to dunge this to
RC,
buttons.
A