Peavey TubeFex Operation Manual page 54

Effects can be added to the current end of the effect chain, or any existing effect can be changed to another
type. Any attempt to add an effect beyond the end of the existing chain or to duplicate an existing effect will
be ignored by the unit.
Compressor
This conmand allows remote access to the Compressor parameters. The data is stored as follows:
0 = Attack Time
1
2 = Sustain
3 = Level
Distortion
PRAM
0 = Drive
1 = Post Gain
2
Edge
4 = Body
5 = Shift
7 = R e s o n a n c e ( t e n t h s ) /
Overdrive
PRAM
0
1
2
Clip Level
L e v e l
4
0 = Rate (units)
1
2 = Depth
Delay (units) \ may be loaded as 1 byte or 2 bytes of data
3
Appendix D Remote Editing with SysEx D-3