Peavey TubeFex Operation Manual page 14

When recording direct, or in some live situations, connect the Direct Outputs of the Tube &x directly
into two channels of a mixing console. If you are using the Tube Fex as a guitar pre;~mp, you may want
to experiment with building sounds using the Speaker Simulator effect. To hook up:
haven't already done so, connect the Left and Right Outputs of the amplifier to speakers.
you
Note: We've found the
Simulator. Experiment and see.
Also, if you use the speaker simulator, you may want it to only affect the sound going direct-to-~->oard.
To get signal to your monitor amplifier insert the fx loop directly before the speaker simulator and
use the fx loop sends to carry signal to your monitor amplifier.
Tube Fex
1000
"
Chapter I Setup
Fex to be so recording friendly that you may not need to use the Speaker
- - - -
- - - -
- - - -
1