Peavey TubeFex Operation Manual page 34

Clean, Crunch, Lead parameters (Passive EQ)
The
B.S.
is O-100. When
Mi
The (Middle) parameter adjusts the amount of midrange frequencies present in the audio signal.
parameter's value even if you are not directly editing the
The Tr (Treble) parameter adjusts the amount of high frequencies present in thy audio signal.
Range is O-100. When
parameter's value even if you are not directly editing the
The Ps (Presence) parameter determines the amount of high fi-equency boost or cut. Range is k30.
Ultra parameters (Active EQ)
Bt
The
value even if you are not directly editing the
The Bd
Range is SO. When
value even if you are not directly editing the
The Ed (Edge) parameter adjusts the amount of high frequencies present in
Range is SO. When
parameter's value even if you are not directly editing the
The Sh (Shift) parameter determines the center of the two mid-frequency IXNK~S. Range is
to 900Hz in 10 Hz increments.
Note: The Effects Loop
A-2
TB (tube) is present in a chain, turning the Bass knob will alter this parameter's
TB
TB
TB
TB
TB
is only availal->le when the Tulx
TB parameters.
TB
parameters.
TB
parameters.
TB
TB
TB
effect is on the front-end of an effects
in the audio sigd.
the adio signd.
Appendix A Individual Effects