Peavey TubeFex Operation Manual page 43

The versatile stereo Reverb effect contains eight types of reverb, each with fully adjustable parameters.
Reverb Types
Produces a smooth reverb similar to that achieved with plate-reverbs.
Produces the many echoes associated with the acoustics of a tunnel.
Simulates the reverb produced by a spring reverb machine.
Produces the ambience of a live room.
Produces the ambience associated with a club stage.
Produces the reverberation ambience associated with a concert hall.
Produces a smooth rolling reverb that cuts off sharply rather than decaying away.
Produces a reverb that builds from a quiet attack to a sharp decay, giving the impression
of an instrument sound being played in reverse.
Parameters
The (Type) parameter selects the type of reverb desired. Select
ROOM, STAGE, HALL, GATED,
of reverb selected.
The Sz (Size) parameter determines the size of the reverb being used. Range is
LARGE, or HUGE.
The PD
PD.
reverberations begin. Range
REVRS
reverb type.
The Tm (Time) parameter allows vary each reverb time. Range is 0-30s (seconds) for all reverb
types except
The (Damping) parameter controls the overall tone of the reverb being produced. Range
Dp:
is Hz
125
being decayed very quickly; higher settings (4
to continue on in the reverberation. This parameter is not available when using the
REVRS
or reverb type.
The Mx (Mix) parameter controls the direct/effect mix at the output of the effect. Range is
Mix.
Appendix A individual Effects
Reverb (RV)
R e v
or
This parameter is not available when using the
GATED and REVRS.
to 8 or OFF. A low setting (250
e r b
REVRS. The parameters will change depending on the type
This parameter is not available when using the
GATED REVRS
For and
Hz) results in high frequency reverberations
8
PLATE, TUNNEL, SPRING,
SMALL, MEDIUM,
GATED or REVRS
types, the range is
OFF)
or allow the high frequencies
reverb type.
GATED
or
GATED
0400%.
A-77