Peavey TubeFex Operation Manual page 39

The Tube Fex offers three types of delays: Stereo, Tapped, and Mono. Each of these delays offers the ability
to set the delay time using a special MIDI Sync Delay feature. The Left and Right delay times can IX set
independently to track MIDI clock messages.
Stereo Delay
A true stereo delay with delay times from 0 to 255 elks if using the MIDI sync feature or 0 to
a normal delay.
Left
Input
Right
Input
Parameters
The (Type) parameter selects the type of t 1
The parameters will change depending on the type of delay selected.
The LD (Left Delay) parameter selects the amount of delay on the left channel. Range is O-361ms.
LD:
The LF (Left Feedback) parameter selects the amount of delay feedback on the lef't channel. This
generates a repeating or echoing sound. Range is O-99%.
The RD (Right Delay) parameter selects the amount of deby on the right channel. l<tngtl is O-361ms.
The RF (Right f;eedhack) parameter selects the amount of delay feedhack on the right channel.
This generates a repeating or echoing sound. Range is O-99%.
The TS (Tape Simulator) parameter is used as a low pass filter before the signal is put through
the feedhack circuit. This feature is used to simulate a warmer, more realistic room sound. Range
is lK,
The Mx (Mix) parameter sets the direct/effect mix. Range is +lOO.
Appendix A Individual Effects
Feedback
Feedback
OFF.
Mix
Right Output
l
STEREO, TAPPED, or MONO.
if using
A-7