Peavey TubeFex Operation Manual page 41

A Mono delay with delay times ranging from 0 to 255 elks if using the MIDI sync feature or 0 to
using a normal delay.
Right Inpu
Parameters
The (Type) parameter selects the
The parameters will change depending on the type of delay selected.
The (Delay) parameter selects the amount of delay. Range is
The Fb (Feedback) parameter selects the amount of delay feedlmck. Feedback is always taken
from the longest delay output. Range is O-99%.
The TS (Tape Simulator) parameter is used as a low pass filter hefore the signal is put through
the feedback circuit. This feature is used to simulate a nrarmer, more realistic room sound. Range
is
The Mx (Mix) parameter sets the direct/effect mix. Range is
Appendix A individual Effects
type
of delay desired. Select
STEREO, TAPPED, or MONO.
A-9