Peavey TubeFex Operation Manual page 48

Thr
The (Threshold) parameter sets the level, in dH, below digital clipping that the gate will begin
to close. Range is -2 to -90
The Sen (Sensitivity) parameter determines the peak level below threshold that the gate will be
fully closed. Kange is
The movable effects loop appears just as any other effect and can be placed anywhere in the effects chain.
The sends are stereo and are available from two jacks at the back of the unit. The returns are in stereo, and
this stereo signal may be summed in stereo with the output from the DSP after the last effect in the chain.
The signal returning to the DSP is summed to mono, then added to the stereo direct signal. This signal is
then passed on to the next effect in the chain.
Note: When a MONO signal is returned, plug the signal into the LEFT/MONO effects return jack. This ensures
that 100% of the return signal is summed back into the A/D converter.
Instrument
Input
Effects
DSP
A-76
l-9.
Sends
L R
I
D/A Converter
Effects Loop
Returns
Appendix A Individual Effects