Peavey TubeFex Operation Manual page 40

This delay creates a stereo delay from a mono source. The range is from 0 to
feature and 0 to 724 ms if using a normal delay.
Left
Input
Right ) ~ ,
Input
Parameters
The (Type) parameter selects the type of delay desired. Select
The parameters will change depending on the type of delay selected.
The (Left Delay) parameter selects the amount of delay on
when using the MIDI Sync feature or
RD
The (Right Delay) parameter selects the amount of delay on the left channel. Kange is
when using the MIDI Sync feature or
Fb
The (Feedback) parameter
from the longest delay output. Kange is O-99%.
The TS (Tape Simulator) parameter is used as a low pass filter before the signal is put through
the feedback circuit. This feature is used to simulate a warmer, more realistic room sound. Range
is
Mx
The (Mix) parameter sets the direct/effxt mix. Range is ~fi
A-8
the amount of delay feedback. Feedback is always taken
selects
OFF.
or
STEREO, TAPPED,
left channel. Range is
using normal delay.
when using normal delay.
100.
Right Output
or MONO.
Appendix A Individual Effects