Leveling The Machine - True STRYKER ST1000 Owner's Manual

LEVELING THE MACHINE

CAUTION:
!
Prevent potential damage to the machine and injury to the user. This unit is equipped with adjustable rear leveling feet.
Make sure that the running surface is level at all times. If the treadmill is placed on a uneven surface, adjusting the rear
feet can help, but may not completely compensate for extremely uneven surfaces. Treadmills that are not level can cause
misalignment of the belt, uneven belt wear, and possible injuries for the user.
Once the machine has been moved to it's designated location:
1. Using a level or estimating by sight, adjust both leveling feet until they contact the fl oor.
IMPORTANT! Do not adjust the leveling feet to such a height that they detach or unscrew from the machine.
2. Verify both wing nuts are securely tightened (wing nuts should be fl ush against the bottom of the frame).
36
1
leveling feet
NOTE: You should be able to
loosen and tighten the wing
nuts by hand. If not, using
pliers can help.
2
wing nut
wing nut